Cool-feeling deformed anti-bacteria polyamide 56 fiber

Functional update and technological deconstruction. Fiber technology has stepped up the stairs of the times in the development and iteration, coexists with ecology, functions and emotion, and continuously extends more potential. With our increasing demands for health management, the functional protection of the body has obtained more attention. Cool feeling,bacteriostasis, far infrared, heat locking and cooling, anti-ultraviolet, anti-static electricity and air purification have become our great demands for psychological security.Multi-functional composite fiber provides the best care in healthcare, safety protection and heat-humidity adaptation, helping us travel freely with no fear of environmental changes and experience the fashion of life technology.

FUNCTIONAL DECONSTRUCTION

UPGRADED COOL-FEELING FIBER

Upgraded cool-feeling fiber, continuously improve the cool-feeling of the product with technological innovation and design breakthroughs.Aluminum

nitride functional factors and anti-bacteria functional particles are combined with cross-section to create cool, quick-drying, and

continuous cool-feeling “fit layer” polyamide 56 fiber with anti-bacteria effect.The polyethylene fiber with dope-dyeing technology is a colorful and eco-friendly label in a cool state.The innovative two-point deformed section design endows polyethylene composite fiber with cool-feeling,

colorfulness and skin-friendly properties,making it a popular choice for summer home textiles.

Cool-feeling deformed anti-bacteria polyamide 56 fiber

Recommendation Reasons

Bio-based nylon is adopted as the base material, and the unique molecular

structure of PA56 is superimposed with deformed section and cool-feeling factors and elements to make the fiber with fast moisture release function, doubling the cool feeling, and bringing consumers a long-lasting comfortable and cool feeling in hot summer.

Processing Technology

Aluminum nitride nano powders and modified zinc oxide nano powders are mixed with PA56 chips according to a certain mass ratio to prepare PA56 composite functional master batches. 4 ~ 8% of PA56 composite functional master batches are added before spinning, and deformed spinneret plate is used to produce cool-feeling deformed anti-bacteria polyamide 56 fiber by melt spinning process.

Characteristics of Fiber and Product

Main Specifications

Staple: 1.67dtex38mm

Filament:78dtex/68f,44dtex/34fFDY,DTY

Standards and Certifications

Polyamide fiber staple(FZ/T52002-2012)

Fiber Performance and Product Features

Bio-based raw materials, green and environmentally friendly.

With fiber in cross-section, the fabric has high instant cool-feeling

coefficient, with Qmax value up to 0.37, providing continuous cool-feeling property.Excellent anti-bacteria property: staphylococcus aureus anti-bacteria rate

≥ 98%， escherichia coli anti-bacteria rate ≥ 95%, and candida albicans

anti-bacteria rate ≥92%.good drapability, moisture-absorption and quick-drying, not easy to wrinkle, comfortable hand feeling

Specifications	Breaking tenacity (cN/dtex)	Elongation at break (%)	Boiling water shrinkage rate (%)	Intertwining degree (%)	Oil content (%)	Dyeing uniformity (gray chip)(grade)
78dtex/68f	4.52	39.2	12.5	2.0	3.2	5

Fabric (90% cool-feeling deformed anti-bacteria polyamide 56 fiber, 10% spandex)
Staphylococcus aureus	Escherichia Coli	Candida albicans	Moisture regain(%)	Instant cool-feeling property on contact J	Continuous cool-feeling performance on contact(Grade)
≥98	≥95	≥92	4.7	0.37	2

The downstream application guidance

Spinning: Staple fiber can be spun purely or blended with other fibers

Weaving: Staple fiber can be spun into yarn for knitted and woven fabrics The higher the content of the fiber in the fabric, the better the effect. The maximum instant cool-feeling property on contact can reach 0.4, and continuous cool-feeling effect can be maintained Dyeing and finishing: It is recommended to use acid dyes,with the dyeing temperature of 95-

98℃; for white fabric, the temperature can be appropriately reduced.

Application instance

Fabric type	Raw material configuration	Main products and features
Knitted plain fabric	90% cool-feeling deformed anti-bacteria polyamide 56 fiber, 10% spandex	Instant cool-feeling coefficient Qmax is 0.32 ~ 0.37; cool and smooth hand feeling,for hot summer days.
Single-faced fine gauge fabric	32% cool-feeling deformed anti-bacteria polyamide 56 fiber, 68% cotton	Strong three-dimensional sense, cool and breathable, moisture absorption and quick drying, comfortable to wear. Used for business leisure polo shirts.
Knitted plain fabric	88% cool-feeling deformed anti-bacteria polyamide 56 fiber, 12%spandex	Good cool-feeling effect, anti-ultraviolet UPFup to 50+.

Fiber Application

Clothing textiles:sportswear,Sweater,Lingerie,Shirt

Home textiles:Bedding,Filler

Q: Do you know the highlights of cool-feeling deformed anti-bacteria

polyamide 56 fiber?

A:Semiconductor material – aluminum nitride is the material with the highest thermal conductivity currently known. lts thermal conductivity is 320W/m-K, which is close to Be0 and SiC, and is more than 5 times that of Al2O Synthetic aluminum nitride is added to the cool-feeling deformed anti-bacteria polyamide 56 fiber, and other synergistic particles are compounded.Then, the effect is further enhanced by the cross-section design to achieve multiple functions such as anti-bacteria, cool feeling, moisture absorption and quick drying, etc.